FUSION P-6 DTF Transfer Low Migration Powder
Default Title
$38.57 USD
Current cart
Current cart
The displayed product is excluded until you add it to your cart.
Economy shipping in the 48 contiguous U.S. states; excludes D.C., Alaska, Hawaii and U.S. territories. Based on your cart subtotal after discounts, before tax. Final eligibility is confirmed at checkout.
Loading your rewards…
FUSION P-6 is a white, low-migration TPU hot-melt adhesive powder for DTF textile transfers. It is designed to produce soft, flexible bonds on natural and synthetic fabrics.
Product details
- Material
- Thermoplastic polyurethane (TPU) adhesive powder
- Printing process
- Direct-to-film (DTF) textile transfers
- Net quantity
- 1 kg
- Package
- One 1 kg bag
- Powder color
- White
- Particle size
- 80–200 µm
- Material melting point
- 80–95°C (176–203°F); this is not the heat-press or oven setting.
Compatible workflow
For textile DTF workflows using compatible DTF inks and transfer film, powder-curing equipment and a heat press. Applied to the printed film after printing.
Application
Apply powder evenly to the printed DTF film, remove loose excess, then cure the adhesive before transferring with a heat press. Use the curing and peel instructions for your ink, film and equipment combination; test adhesion and finish on the intended fabric.
Heat-press starting settings: 110–130°C (230–266°F) for 8–15 seconds, with a specified pressure range of 0.15–0.25 MPa. Adjust for the transfer film, fabric and press; these are transfer settings, not oven-curing settings.
Garment care
Allow 24 hours before the first wash. Turn the garment inside out and wash cold with mild detergent. Avoid bleach, use low tumble heat or air dry, and keep the iron off the transfer.